Bid to develop and manufacture a prototype for a Remote Radiation & Weather monitoring Station Describe of the work: The required system will be used to monitor and control weather and gamma radiation remotely. The system includes a remote station that has all sensor. The sensors monitor the weather and gamma radiation and send the data via 4G communication system to a remote computer. The station will include all needed software and hardware to monitor and web transfer the data to the remote computer. The data will be encrypted for security reason. The station will include at least the following hardware: 1) GSM/4G/LET GPs and satellite (iridium). 2) CAEN Gamon-D (or similar) for combined GM and NaI(Tl) detection with spectroscopy and radioisotope identification software. 3) All in one weather station (HDMCS-100 weather) or similar; 4) Data logger and microcomputer include all communication modules, 5) Solar panel with rechargeable battery. 6) IP65 Control panel; 7) A web-based monitor and control system/ software to control and display all the readings of all sensors. 8) Dashboard to display and control all sensors. 9) Display the location of the station and all readings on map. 10) Any other hardware, firmware & Software needed for the work and/or to build the system. 11) Working condition of all system must be -20 to 60 degrees Celsius. 12) Possibility of adding air quality sensors. 13) Please note that the project includes the development and provision of all software, and hardware needed. Your proposal must include list of all hardware you will use as well as total cost and milestone payment and project time line. All payments will go via freelancer.