I have a flat PNG illustration that must become a true-to-image 3D model ready for printing. The end product needs to be delivered as an STL file and it has to capture every contour, recess, and raised feature exactly as they appear in the artwork—no loss of fidelity, no simplified edges. The print will be produced at specific dimensions; I’ll pass the exact measurements (height, width, depth) the moment we kick off so you can scale the geometry precisely. Please keep tolerances tight so that what I see on-screen is what comes off the printer. High detail is mandatory. I’m expecting clean topology, a fully manifold mesh, and proper normals so the file slices flawlessly in Cura or PrusaSlicer. Whether you sculpt in ZBrush, model in Blender, or take a CAD route with Fusion 360 or SolidWorks is up to you, as long as the final STL is watertight and ready for FDM or resin workflows. Final print size is 1.5 inches wide and .1 inches tall Before hand-over, run a quick printability check (Meshmixer or Netfabb is fine) and verify that no supports interfere with the design elements embedded in the PNG. When everything is locked, send me the STL plus the native file so I can make minor tweaks later if needed. Deliverable: 1 high-detail, dimension-accurate STL that mirrors the PNG exactly, accompanied by its editable source file.