Hi, I am trying to get 3d printed case for C13 sockets for 10 inch mini server rack. https://www.alibaba.com/product-detail/DeskPi-RackMate-T1_1601236515691.html Here are some examples, but i need adjustments: https://pduonline.co.uk/product/8-way-10-inch-horizontal-c13-iec-pdu / https://www.thingiverse.com/thing:7193886 1. Body width needs to remain 219cm. 2. Mounting hole sizes and positions need to be same as on designs above. 3. Body height can remain the same, but depth need to be much smaller, just enough for components to fit. 4. Unlike on example above, i need sockets to be on opposite side (inward), pushed all the way to right and be able to clip in, i purchased 2 of these, you can see there is a clip that is ment to attach, so tickness matters. https://www.aliexpress.com/item/1005007677073094.html?spm=a2g0o.order_list.order_list_main.11.65501802AUamXd 5. On outward side (opposite of sockets), if possible on left side (since sockets are pushed to right, there is some room) to fit switch: https://www.aliexpress.com/item/1005007031895272.html?spm=a2g0o.cart.0.0.602038da7i4sJG&mp=1&pdp_npi=5%40dis%21EUR%21EUR%209.66%21EUR%206.76%21%21EUR%206.76%21%21%21%40211b431017634897901527219e376f%2112000039967286761%21ct%21SI%21713740967%21%211%210