I need a fresh CAD layout for an acrylic window that will bolt into an existing frame. The current assembly uses holding tabs, so every new hole must line up with those originals while following a custom pattern that I’ll share once we start. Key points • Translate my measurements and reference drawing into a clean, production-ready CAD file. • Respect the exact spacing and location of each mounting hole—no clashes with the old tabs. • Use a custom hole pattern, not a simple mirror of the old sheet. • Deliver native CAD (SolidWorks, Inventor, or similar) plus a neutral format such as STEP/DXF and a PDF with dimensions. This is a quick-turn job; I’d like the first draft as soon as possible, with any minor tweaks wrapped up right after review.