I need a 3D CAD model of extruded text that will be produced in plastic and later finished with a matte surface. The lettering will be small—no larger than 12 inches from end to end—so the draft angle must be smartly built in for clean release from a mold or for CNC machining. Scope • Model each character with consistent wall thickness and a subtle draft that meets standard plastic fabrication guidelines. • Keep edges crisp enough for a matte finish yet free from under-cuts that could trap tooling. • Provide files in STEP and STL; native SolidWorks or Fusion 360 format is a plus. Acceptance • Geometry prints cleanly on a quick FDM test (I’ll run a scaled sample). • Dimensions match my supplied artwork (I’ll share outlines once we start). • All fillets, tapers, and wall thicknesses pass a simple mold-flow sanity check. If you have experience preparing plastic signage or consumer product housings, this will be familiar territory. Show me a couple of similar parts you have drafted, and let’s get this sign text ready for production.