Outdoor Wood Stove in Corten Steel Design a modern outdoor wood-burning stove made of Corten steel, visually similar to the attached reference image (RB73-style). The design must be ready for production, with fully detailed manufacturing drawings and 3D files suitable for laser cutting, bending, and welding. General Description The stove will be a freestanding, rectangular unit with: A fire chamber enclosed by Corten steel and heat-resistant glass on three sides. A lower section for firewood storage. A chimney pipe on top to ensure proper draft. Clean, minimalistic lines with visible Corten joints (industrial look). The design must allow easy assembly and maintenance, and withstand outdoor exposure all year round. Dimensions (approximate target sizes) Overall height: 1300–1400 mm (excluding chimney) Width: 480–500 mm Depth: 480–500 mm Firewood compartment height: ~300 mm Fire chamber internal dimensions: ~500 × 500 × 500 mm Chimney diameter: Ø150 mm Chimney height: 1000–1500 mm (detachable if possible) Designer may adjust slightly for structural integrity or aesthetics. Material Specifications Main structure: Corten steel, 3–4 mm thick Option: 5 mm for bottom and top plates for additional stiffness. Glass panels: 4–5 mm ceramic glass (Schott Robax or equivalent), framed and bolted or clamped securely. Door: Front access with simple latch and heat-resistant handle. Hinges to be in stainless steel or corten-compatible material. Bottom grate: Laser-cut or welded steel grate for airflow. Ash tray (optional): Slide-out tray beneath the grate. Drain holes: Ø10–12 mm in the bottom plate for rainwater drainage. Legs / base clearance: 50–100 mm above ground to prevent corrosion buildup. Functional Requirementsd Ventilation: Primary air intake from below (via grate and openings). Secondary air intake near the glass to reduce soot buildup (if feasible). Thermal considerations: Tolerate temperatures up to 700 °C inside fire chamber. Outer surface to have air gap or double wall if possible to reduce exterior temperature. Assembly: Design must be manufacturable with laser-cut flat panels, folded edges where necessary, and minimal welding. Allow disassembly for transport (modular design preferred). Corrosion & weather: All exterior surfaces in Corten steel (unpainted). Drainage and ventilation must prevent water accumulation. Deliverables 3D CAD model in STEP, SolidWorks, or Fusion 360 format. Full set of 2D production drawings, including: All dimensions, tolerances, and bending lines. Material thickness and specifications. Welding and assembly notes. Exploded view with part list (BOM). Renderings (optional): Realistic image showing final appearance. Expectations from the Freelancer - Experience with metal fabrication design, sheet-metal modeling, and Corten steel structures. - Understanding of thermal design for fire-exposed components. Ability to deliver ready-to-manufacture drawings (no conceptual sketches only). Fluent communication in English and open to minor revisions after review.