Description: I’m looking for a 3D designer to create a flexible splash guard attachment for a Gemmasta cabbing machine (see attached photo). The guard should help prevent side spray from the grinding wheel while still allowing easy removal for cleaning and wheel changes. Key Requirements: • Designed to slide onto the side shroud approximately 40 mm deep for a snug friction fit. • Made for 3D printing in a flexible filament (e.g. TPU or similar). • Should curve naturally with the machine’s housing to block water spray without interfering with wheel rotation or the drip feed. • The inner curve must match the contour shown in the reference image (outline provided). • Must be removable — no screws or permanent attachment. • Aim for ease of printability on a standard 3D printer (≤ 250 mm bed if possible). • Optional: include a small lip or edge to redirect water downward. Deliverables: • Printable STL and STEP (or Fusion 360) files. • Rendered preview images of the final design. • Small adjustment round after first draft. Reference: • Photo attached showing wheel area and the outlined shape to base the guard on. • Photo attached showing wheel frontal area